AEG Protect C 3000
![]() |
the double conversion, full power 3000 VA, active power 2100 W, automatic type fuse, sine, number of output connectors: 4, operating time: 5 m, RS-232, LAN, telephone line, filtering clutter, noise level: 45 DB
|
Technical specifications | |
Type | the double conversion |
Active power | 2100 W |
Full power | 3000 VA |
Run time at full load | 5 min |
Run time at half load | 15 min |
Form output signal | sinusoid |
Number of output power (total) | 4 |
Distortion factor | 4 % |
Battery | |
Charging time | 5 ч |
The possibility of replacing the batteries |
![]() |
Hot swappable batteries |
![]() |
Connecting additional battery |
![]() |
Input and output | |
Type of output network | 1-phase |
Mines. input voltage (v) | 160 V |
Max. input voltage (v) | 300 V |
Mines. input frequency (Hz) | 46 Hz |
Max. input frequency (Hz) | 64 Hz |
Office | |
USB Interface |
![]() |
Ethernet 10/100 |
![]() |
Interface RS-232 |
![]() |
Slot for optional interfaces |
![]() |
Dry contacts |
![]() |
Functionality | |
Showing information | led indicators |
Acoustic alarm |
![]() |
Ability to rack |
![]() |
Height (in units) | 2 U |
Automatic By-pass |
![]() |
Protection | |
Overload protection |
![]() |
Fuse type | automatic |
Short circuit protection |
![]() |
Phone line protection |
![]() |
Protection of local network |
![]() |
Protection of the antenna cable |
![]() |
Noise filtering |
![]() |
Additional information | |
Noise level | 45 dB |
Noise level | 45 DB |
Dimensions and weight | |
Weight | 35.5 kg |
Width | 192 mm |
Height | 340 mm |
Depth | 460 mm |